Instructions
Aluminum grass catcher bracket assembly instructions.
*Images provided for assembly reference.
1.Insert carriage bolts through provided backing plates and install from INSIDE catcher.
2. Install brackets and nuts onto carriage bolts tighten to secure brackets.
SCAG DECK BRACKET INSTALLATION:
1. Align deck bracket onto discharge deck. Front of bracket should be 3/8" behind inner edge of deck side. *see image for reference.
2. Flush edge of bracket with deck edge and clamp in place for drilling.
3. Drill the holes for 5/16" hardware. *Bracket provided w/ additional holes to fit multiple models, choose a minimum of TWO holes that best fit your application.
4. Install hardware from inside of deck with nylock nuts on top of bracket.
5. Slide square plate front to back until edge is flush with deck bracket, bolt in place.
6. Tighten hardware and hang grasscatcher.
